An equipment maintenance log is the record that shows each piece of gear was serviced, who did the work, and when it is due again. For a dive contractor it is also the first thing an auditor or a safety officer asks to see. This guide lists what to record for every helmet, regulator, cylinder, compressor and umbilical you run, gives you a free spreadsheet template with those fields, and shows where a spreadsheet starts to fall short.
Why the record matters as much as the servicing
Gear that was serviced but not recorded looks the same to an auditor as gear that was never serviced. The rules are written around the record:
- Federal rules. The Canada Occupational Health and Safety Regulations require diving equipment to be inspected, tested, maintained and calibrated by a qualified person at the intervals the manufacturer recommends, and whenever it is thought to be defective (section 18.26). The employer keeps a record of each inspection, test, maintenance and calibration for five years (section 18.42). These rules cover federally regulated work.
- British Columbia. The WorkSafeBC OHS Regulation requires service records for breathing apparatus to be available to an officer and to workers on the dive site, and the hydro and visual inspection dates of each scuba cylinder to be entered in the maintenance log (Part 24, sections 24.27 and 24.39).
- CSA Z275.2. The occupational safety code for diving operations sets equipment requirements of its own. Work from the edition that applies to your contract. We do not reproduce it here.
Check the rules for your province and your work. The common thread is the same everywhere: a dated record for each item, kept for years, that you can produce on the spot.
What to record in an equipment maintenance log
A useful log has three parts. Keep them apart, even in a spreadsheet, so one item’s history never gets lost in a long list of mixed entries.
1. The gear register: one row per item
| Field | What goes in it | Example |
|---|---|---|
| Gear ID | Your own tag or asset number, marked on the item | HLM-03 |
| Item type | Helmet, mask, regulator, cylinder, compressor, umbilical, gauge | Helmet |
| Make and model | As shown on the manufacturer’s label | Kirby Morgan 37 |
| Serial number | Read from the item, not from the invoice | FM-30417 |
| Location or assigned to | Shop, truck, vessel, or the diver it is issued to | Truck 2 |
| In service date | When it went into use | 2022-04-11 |
| Status | In service, out of service, or retired | In service |
2. The servicing jobs: what each item needs, and how often
| Field | What goes in it |
|---|---|
| Gear ID | Links the job to the item in the register |
| Job | Annual service, visual inspection, hydro, function test, calibration, air quality test |
| Interval | In months, or in running hours for a compressor |
| Basis | Where the interval comes from: manufacturer, code or regulation, or company policy |
| Last done | Date of the last completed job |
| Next due | Last done plus the interval |
| Status | In date, due within 30 days, or overdue |
Most items carry more than one job. In BC a scuba cylinder needs an internal visual inspection every year and a hydro at least every five years. A helmet needs the overhaul its manufacturer sets, plus the checks the manual lists before each use. Give each job its own row and its own due date. The preventive maintenance schedule for dive gear lists typical jobs item by item.
3. The service log: one row per job done
| Field | What goes in it |
|---|---|
| Date | The day the work was done |
| Gear ID and job | Which item, which servicing job |
| Work done | What was inspected, replaced or adjusted |
| Parts used | Service kit or part numbers |
| Result | Pass, fail, repaired, or removed from service |
| Done by | Name of the technician |
| Qualification or company | The service centre, or the technician’s training or factory certification |
| Reference | Certificate, test report or work order number |
The service log is the part an auditor reads closely. Never overwrite a row. If an entry was wrong, add a corrected row and note why.
Free equipment maintenance log template
The template is an Excel file (.xlsx) with the three sheets above and a short instructions sheet. It opens in Excel, Google Sheets, Numbers and LibreOffice. The servicing jobs sheet works out each next due date and flags anything due within 30 days or overdue.
How to fill it in
- Start with the register. Walk the shop, the trucks and the vessel, and put an ID on anything that lacks one. Read serial numbers off the gear.
- Add the servicing jobs. For each item, take the jobs and intervals from the manufacturer’s manual. Where a code or regulation sets a shorter interval, use the shorter one and say so under Basis.
- Fill in Last done from your current paperwork. If you cannot prove when a job was last done, treat it as due now.
- Log every job as it is done: a new row in the service log, then update Last done on the job.
- Keep the paper. Scan each certificate, name the file with the Gear ID and date, and put the file name under Reference.
- Review weekly. Sort the servicing jobs by Next due and book anything due within 30 days.
Checklist: is your log ready for an audit?
- Every item in use is in the register, with its serial number.
- Every item has at least one servicing job with a due date.
- Nothing is past due unless it is marked out of service.
- Every completed job has a dated entry showing who did it.
- Each certificate or test report can be found from its log entry.
- Records go back as far as your regulator requires: five years under the federal rules.
- The records can be shown on the dive site, not only in the office.
Where a spreadsheet falls short
A spreadsheet log works for a small kit that one careful person looks after. It gets harder as the gear count, the crew and the number of sites grow:
- It does not warn anyone. The due date flag only helps if someone opens the file. A hydro date can sit in a cell nobody looked at this month.
- Copies drift apart. The copy on the truck laptop and the copy in the office stop matching within weeks.
- There is no audit trail. Anyone can change a date, and nothing shows who changed it or when.
- The proof lives somewhere else. The log says a regulator was serviced. The paper that proves it is in a binder at another site.
- It depends on one person. When the person who keeps it is away on another job, it stops being kept.
When the spreadsheet stops working goes through each of these with examples, and PM log or CMMS covers what to look for when you move to software.
How GearMaster keeps the same log
GearMaster is a preventive maintenance log built for dive gear, and it keeps the same three parts. Each item has its own record. Each record carries its own servicing jobs with their own due dates. Every service is recorded against the gear it was done on, so the history is one click away.
On top of that, GearMaster sends email notice 30 days before a job falls due, shows every item as Healthy, Impending or Overdue, keeps an audit log of every change that you can export to CSV, and stores manuals, certificates and inspection reports next to the gear they cover. See the full feature list, or how it fits WorkSafeBC and CSA Z275.2. Onboarding help comes with every plan.