Search for equipment maintenance software and most of what comes back is a CMMS, a computerized maintenance management system built for plants, fleets and buildings. A dive contractor’s problem is narrower: know when every helmet, regulator, cylinder and compressor is due for servicing, keep the record, and show it to an auditor. This guide compares a CMMS with a preventive maintenance (PM) log, honestly, so you can tell which one fits your operation.
What a CMMS is built for
A CMMS runs a maintenance department. Its centre is the work order: a job is raised, planned, assigned to a technician, done, and closed with hours and parts charged against it. Around that sit the other modules:
- Asset hierarchies: a plant, its lines, its machines, their components.
- Work order planning and technician scheduling.
- Labour hours and maintenance cost tracking.
- Spare parts inventory, reorder points and purchasing.
- Meter readings and condition monitoring.
- Downtime and failure reporting.
That is the right tool when you have planners, a parts store and a crew of maintenance technicians. It takes time to set up and someone to run it.
What a dive contractor needs to track
Most dive contractors do not run a maintenance department. The servicing is done by a technician on the crew or sent out to a service centre. What has to be right is the record:
- Every item, with its serial number and where it is.
- Each servicing job the item needs (annual service, visual inspection, hydro, air quality test) and its due date.
- A dated history of what was done, by whom, with the certificate.
- Plain status before the crew loads the truck: in date, coming due, or overdue.
- An audit trail that shows the record was not changed after the fact.
- Records you can produce on request. Federal rules require each inspection, test and maintenance record to be kept five years (section 18.42), and in BC service records must be available to an officer and to workers on the dive site (WorkSafeBC section 24.27).
The equipment maintenance log guide lists the fields in detail.
PM log or CMMS: side by side
| CMMS | PM log for dive gear | |
|---|---|---|
| Main job | Run maintenance work across a plant or fleet | Keep servicing on schedule and keep the record |
| Typical user | Maintenance planner and technicians | Owner, operations manager or dive supervisor |
| Unit of work | Work order | Servicing job with a due date |
| Setup | Weeks: asset tree, job plans, parts, users | Days: gear list and servicing jobs |
| Due date warnings | Yes, through PM triggers | Yes, the main purpose |
| Service history per item | Yes, through closed work orders | Yes, recorded against the item |
| Audit trail | Varies by product | Should be built in; ask |
| Certificates and manuals | Usually as attachments | Stored with the item |
| Labour hours and costing | Yes | Usually not |
| Purchasing | Often | Usually not |
| Dive gear terms out of the box | No, you configure them | Yes: hydro, visual inspection, annual service |
When a CMMS is the right choice
A CMMS earns its cost when maintenance is a large share of what you do:
- You run vessels, cranes, hot water units and generators as well as dive gear, and want one system for all of it.
- You have maintenance staff whose hours need planning and costing.
- You hold a parts store with reorder points and purchase orders.
- Your client contract asks for a planned maintenance system across the whole spread.
If that is you, choose a CMMS and set up the dive gear in it with care: one asset per item, one PM trigger per servicing job, and certificates attached to each closed work order.
When a PM log is the right choice
- Your main exposure is the dive gear and its records.
- The people who keep the record are also diving, supervising or running the business.
- You need status at a glance before a job, not a work order queue.
- You want it working this month, without a configuration project.
For most small and mid-sized contractors, the honest answer is a PM log. A CMMS that is half set up is worse than a spreadsheet, because people stop trusting it.
Questions to ask any equipment maintenance software vendor
- Can one item carry several servicing jobs, each with its own interval and due date?
- Does it warn me by email before a job falls due, without anyone logging in?
- Can I see the status of every item on one screen?
- Is every change to gear and servicing records logged, and can I export that log?
- Can I store certificates and manuals with the item they cover?
- Can I give each person the access they need, including read-only?
- How long does setup take, and is onboarding help included?
- What does it cost in Canadian dollars, and what sets the price: users, items or modules?
- Where is the data kept, how is it backed up, and is it kept apart from other customers’ data?
- If I leave, can I take my records with me?
Write the answers down. The vendor that cannot answer the first four clearly is not built for this job.
Where GearMaster fits
GearMaster is a preventive maintenance log for dive gear. It is not a CMMS, and it does not try to run work orders or labour costing. Here is how it answers the questions above:
- Servicing jobs per item. Each item carries its own servicing jobs, each with its own due date. The number allowed per item depends on the plan.
- Warnings. Email notice 30 days before a job falls due, a daily email when an item’s status changes, and a summary of the whole inventory every week, or on a schedule you choose on Premium.
- Status. An overview dashboard shows every item as Healthy, Impending or Overdue.
- Audit log. Every change to gear and servicing records is logged, and the log exports to CSV.
- Docs. Manuals, certificates and inspection reports sit next to the gear they cover.
- Access. Seats with access levels, read-only included.
- Parts and supplies. Stock tracking for the parts your servicing uses, so a job is not held up by a missing kit.
- Security. PCI compliant, 256-bit encryption, each company’s data kept isolated, redundant backups.
- Price. Plans are priced in Canadian dollars by the amount of active gear, from 10 to 200 items. See pricing.
It is approved by WorkSafeBC and complies with CSA Z275.2 Section 6. See the compliance section and the full feature list.
If you are still deciding whether you need software at all, when the spreadsheet stops working walks through the signs, and the preventive maintenance schedule for dive gear shows what you would be tracking.